TANSA

CARRIER RINGS

Carrier Rings are used



Carrier Rings are used :
	When flanges are not sufficiently thick for tapings.
	On Lined Pipe Lines
	Used with composite flanges
	Where pipe tapings are not practical.

Various Types of Carrier Rings

Type CR1

This Carrier Ring is made from solid one piece,
Orifice plate is part of this carrier Ring. Tapping
position is fixed at the time of manufacturing
and can not be changed afterwards. These are
manufactured for line size 15NB on wards. Tap
type is corner tap.

Type CR2

Orifice Plate can be changed whenever
necessary. Annular chamber improves the
pressure signal. Tap type is corner tap

Type CR3-1 / CR3-2

Carrier ring is provided with Transmitter Pad.
(CR3-1) Transmitter can be directly mounted on
the pad. 3 Valve Manifold also can be used to
mount Transmitter. (CR3-2).
No need of piping. Less number of joints
elements leakage possibilities. Model is very
compact. Orifice plate can be a part of Carrier
Ring or can be provided separately and screwed
on the carrier ring. Tap type is corner tap.

Type CR4

Used for By Pass Rotameter. Tap type is flange
Tap. Orifice plate can be changed if required.
Tap position can be changed.

Type C-RTJ-1 & 2

Used in all flange applications. Orifice Plate is
an integral part of Carrier Ring (C-RTJ1). Orifice
Plate can be provided separately and screwed
on the carrier ring (C-RTJ-2.)

Glass Tube Rotameter	Flow Switch For Glass Tube Rotameter	Glass Tube Rotameter with transmitter	Bi Stable Switch	Metal Tube
Metal Tube Rotameter with Transmitter	By-pass Rotameter	Orifice Plates & Assemblies	Carrier Ring	Magmeter
Acrylic Rotameter	Low Flow	Purge Rotameter with D.P.Regulator	Sight Flow Indicator	Wheel Flowmeter

Download .pdf